PRO-48 Sleeve & Bush Retainer
HIGH-TEMPERATURE RETAINER
A high strength, high temperature resistant retaining adhesive that secures all types of cylindrical parts, with a continuous working temperature up to 180°C. It can also be used to lock metal threads and close-fitting metal parts, shafts or splines to retain bearings in high-temperature applications.
Sizes : 10ml / 25ml / 50ml
Sku : PRO-48
- Colour Green
- High Strength
- Max Temp 180°C
- 20 Mins Handling
It can also be used to lock metal threads and close fitting metal parts, shafts or splines to retain bearings in high temperature applications.
Warning : Causes severe skin burns and eye damage. May cause an allergic skin reaction. Do not breathe vapour / spray. Wear protective gloves / protective clothing / eye protection / face protection.
If On Skin (or Hair) : Take off immediately all contaminated clothing. Rinse skin with water / shower.
If In Eyes : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents / container in accordance with national regulations.
Contains : Ethoxylated Bisphenol A Dimethacrylate, 2-hydroxypropyl methacrylate, Acylic acid, a,a-dimethylbenzyl hydroperoxide.
KEEP OUT OF REACH OF CHILDREN
- Clean all threads (bolt and hole) with a cleaning solvent such as Bondloc Solvent Cleaner B7063 or Bondloc Brake Cleaner B7769 and allow to dry.
- Determine if the threads to be bonded are active or inactive metals. If material is an inactive metal, spray all threads with Bondloc B7649 Activator and allow to dry. Priming is not required if the material is an active metal. If unknown, it is always best to use the activator.
