5 Minute Fast Cure Epoxy
£7.49 inc. VAT
Bondloc’s Fast Cure Epoxy is a 5 minute clear resin suitable for bonding a wide variety of surfaces including wood, steel, fibreglass, carbon fibre, glass, leather rubber, cardboard, most plastics, aluminium and galvanised iron. Water resistant. Product reacts within a few minutes to give a tough resilient bond.
Sku : Auto12
- Colour Clear
- 5 Mins Cure Time
- Liquid Resistant
PART A: Resin
Warning : May cause an allergic skin reaction. Wear protective gloves / protective clothing / eye protection / face protection.
If On Skin : Wash with plenty of water. If skin irritation or rash occurs, seek medical advice / attention. Collect spillage. Dispose of contents / container in accordance with national regulations.
Contains : Bisphenol-A (epichlorhydrin), Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxy-propane and phenol.
PART B: Hardener
Danger : Causes severe skin burns and eye damage. May cause an allergic skin reaction. Do not breathe vapour / spray. Wear protective gloves / protective clothing / eye protection / face protection.
If Swallowed : Do NOT induce vomiting.
If On Skin (or Hair) : Take off immediately all contaminated clothing. Rinse skin with water or shower. If skin irritation or rash occurs, seek medical advice / attention.
Contains : Triethylene Glycol Dimercaptan, N(3-dimethylaminopropyl)-1,3-propylenediamine.
- Ensure that surfaces to be bonded are clean and free from grease, dirt, dust and any other contamination.
- Mix equal quantities either by weight or volume of the two parts and stir thoroughly until an even colour is obtained. Where a static mixing nozzle is supplied the 2 parts will be mixed correctly upon dispensing.
- Apply to one surface and offer up the second surface. Clamp or jig together under light pressure.
- Leave to cure at room temperature, for optimum strength allow 24 hours, 75% strength is achieved within 2 hours.
