PRO-90 Instant Bond/Gap Fill
Bondloc’s Instant Bond fast curing 2-part instant adhesive has a high bond strength suitable for a variety of substrates including plastics, rubbers and metals and for bonding porous materials such as wood, paper, leather and fabric. It is designed to gap-fill to 5mm.
The gel prevents adhesive flow even on vertical surfaces.
Size: 10g
Sku : PRO-90
- Colour : Clear
- Viscosity : Gel
- Base : Ethyl
- Fixture Time (EPDM) : 90 – 150 seconds
Bondloc Instant Bond/Gap Fill Flexible is an instant adhesive/repair product with excellent adhesion to a very broad range of materials and surfaces. Curing times of only 4 minutes while a hard and tough polymer results within 8 minutes, working times (in-mixer) up to 10 minutes, total volumetric gap filling, with minimal volumetric shrinkage make this product an ideal repair adhesive filler. Instant adhesion to most plastics, wood and metals including aluminium, and to porous and irregular surfaces. The gel consistency enables application in any orientation whilst the static mixing nozzle ensures uniform and precise application for exceptional user convenience.
- Before applying the glue, make sure the glue surface is dry and clean, dry and free of grease.
- To assemble the syringe, first introduce the plunger, then exchange the cap with a mixer. Discard the first few drops.
- Apply the material on one of the two surfaces and assemble the two parts within 1 minute.
- After uniting the substrates, 15-30 seconds are available for repositioning on the substrates. Press the two parts together firmly for around 30 seconds. After releasing the pressure, wait 5 minutes before good handling strength, 10 minutes for a fully cured material and 24 hours for full strength.
- Make use of the syringe or discard the product at least every 2 minutes to avoid the product from polymerising inside the mixer, if you do not want to replace the mixer.
