RTV Silicone Sealant 85ml
Bondloc’s RTV Silicone Sealant is suitable for sealing aluminium and metal ducting fabrications, butt and channel glazing, gasketing and most industrial applications. It is a high temperature, single component, high modulus, acetoxy curing silicone sealant / adhesive that vulcanises at room temperature to provide a permanently flexible seal and bond. Joint movements of up ±30%. Temperatures resistance 300°C continuously / 350°C intermittently.
Sku : Auto51-85
- Colour : Various
- Base : Acetoxy
- Viscosity : Paste
- Min / Max Temp : -40°C – +150°C
- Skinning Time : 5 mins 20°C
Adheres to most services. Easy to use. Bondloc Silicone Gasket can be used in home, automotive & marine applications. It is weatherproof and water resistant. It adheres to a variety of materials including glass, vinyl, wood, brick & concrete. It is good for sealing aluminium and metal flanges on gearboxes. Can be used in fabrications, butt and channel glazing, refrigeration and hygiene seal, aluminium gutter sealing, most industrial applications.
Adheres to most services. Easy to use. Bondloc Silicone Gasket can be used in home, automotive & marine applications. It is weatherproof and water resistant. It adheres to a variety of materials including glass, vinyl, wood, brick & concrete. It is good for sealing aluminium and metal flanges on gearboxes. Can be used in fabrications, butt and channel glazing, refrigeration and hygiene seal, aluminium gutter sealing, most industrial applications.
Surface Preparation : Joint must be sound, clean, dry and free from oil and greases. Use B7063 cleaner or a strong gasket remover.
Power Can : Remove end cap, break away small grey clip, trigger becomes active, indicator shows direction to turn to increase and decrease flow. Dispense bead as required. Cartridge: Cut the tip of the cartridge taking care not to damage the thread and affix nozzle to cartridge. Cut nozzle at 45° leaving an opening slightly larger than the gap to be filled. Apply using a standard sealant gun using firm even pressure to achieve the desired bead width. To ensure a proper bond smooth the sealant with a spatula or similar tool.
Cleaning : Clean up any excess material immediately with white spirit. Hardened sealant can only be removed mechanically or with sealant remover. Wash hands with soap and water.
